Before starting your project, it is important to carefully calculate the amount of material you will need. Here's how:

Estimate the area to be covered, in square feet.
Add about 5%, to cover losses, after taking your measurements in feet.
Multiply the result obtained by the price per square foot of the product of your choice; add installation cost if applicable.
Check how the wood you want to install is sold. Often these products can only be purchased in full cartons.
Have your calculations checked by an expert before ordering. This first step only serves to establish the budget for the work.

Before starting your project, it is important to carefully calculate the amount of material you will need. Here's how:

1. Estimate the area to be covered, in square feet.
2. Add approximately 5%, to cover losses, after taking your measurements in feet.
3. Multiply the result obtained by the price per square foot of the product of your choice; add installation cost if applicable.
4. Check how the wood you want to install is sold. Often these products can only be purchased in full cartons.
5. Have your calculations checked by an expert before ordering. This first step is only used to establish the budget for the work.

Advantages of laminate flooring
• Very durable
• Easy to maintain
• Resists scratches, marks, chemicals and stains
• Easy installation

Cleaning the floating floor can be done with a broom or a vacuum cleaner. It can be washed with a damp mop and a cleaning product recommended by the manufacturer. It should never be washed with plenty of water.

• Sweep or vacuum your laminate floor at least once a week.
• Immediately wipe up any liquid to prevent it from seeping between the boards.
• Remove sand or abrasive materials to avoid scratches.
• Remove stubborn dirt and stains, such as paint stains, with acetone or an alcohol-based solvent.
• Wash the floor regularly with a mop moistened with water and a little laminate floor cleaner. Avoid using a lot of water when cleaning.

The carpet should be vacuumed at least once a week and ensure that the device has good suction power. It should also be thoroughly cleaned by professionals once a year. The carpet treated against stains will be much easier to maintain.

Remove stains immediately!

In four simple steps, you can remove most beverage or food stains:
• Remove most of what has been spilled on the carpet, using a knife or a spoon.
• Sponge the surface, without RUBBER, using a well-absorbent white cloth, to remove as much liquid as possible.
•If the stain is caused by a liquid, use carbonated water as an emergency cleaner (soda or sparkling mineral water, but NOT SOFT DRINKS). Pour a little soda water over the blotted stain, let sit for a while, then blot again to loosen. NEVER RUB. Repeat as needed.
• Gently brush the fibers and let dry.